ROI-RFX-MA · wireless 4-20 mA
4-20 mA transmitters to a PC – without the cable
The ROI-RFX-MA reads four 4-20 mA sensor transmitters at the sensor end and sends the readings over 2.4 GHz to a second ROI-RFX at the PC. Each unit does the signal conditioning and conversion itself and scales the readings to engineering units, so the PC receives finished values over a serial connection. ROI viewing and recording software (Lite edition) is included with a pair.
A working setup
- At least 2 ROI-RFX units: one at the sensors, one at the PC
- ROI viewing and recording software – Lite edition (download)
Not included: power supplies for the ROI-RFX units and for the 4-20 mA transmitters, serial port cable, PC.
When cable is the problem
A road, water, a yard or a height difference between the sensor and the PC can make a cable run expensive or impossible. With the antennas in line of sight, a wireless link bypasses the obstacle – up to about a mile with the right antenna.
- Tanks, pumps and remote equipment across a site
- Sensors on the far side of a road or waterway
- Temporary test setups where cabling isn’t worth it

Specifications
- Model
- ROI-RFX-MA
- Inputs
- 4 × 4-20 mA sensor transmitters per unit
- Wireless
- 2.4 GHz, line of sight, up to about 1 mile with the right antenna
- Output to PC
- Serial data, values scaled to engineering units
- Minimum setup
- 2 units (sensor end and PC end)
- Size
- 4.510 × 1.258 × 3.948 in
- Software
- ROI viewing and recording software – Lite edition, included with a pair
Included software
- Channel setup with labels, engineering units and scaling
- Charts and digital meters for live readings
- Data file recording with one click
- Live readings into Excel as they arrive
Need a custom screen, calculations or reports? We write custom software on quote.
Other ROI-RFX inputs and next steps
Thermistors
Wireless temperature
ROI-RFX-10K reads four 10K NTC thermistors directly – no transmitter needed.
All wireless
Wireless signal conditioning
Thermistors, potentiometers, switch contacts and 4-20 mA over 2.4 GHz.
Cabled
Many points on one cable
When a cable run is possible: transmitters and ROI-IOM I/O on one RS-485 cable.
ROI-RFX – common questions
How many units do I need?
At least two: one at the sensors and one at the PC. Each sensor-end unit reads four 4-20 mA transmitters.
How far does it reach?
Up to about a mile over 2.4 GHz with the right antenna, with the antennas in line of sight.
What software comes with it?
ROI viewing and recording software, Lite edition, is included with a pair: channel setup, charts, digital meters, data file recording and live readings into Excel.
What else do I need?
Power supplies for the ROI-RFX units and for the 4-20 mA transmitters, a serial port cable and a Windows PC.
Readings from where the cable can’t go
Tell us the sensors, the distance and what’s in between – we’ll size the wireless link and antennas.
Questions? Contact us – we look forward to answering them.
