Custom Data Acquisition and Test Systems
We build measurement systems that measure, calculate, record – and, when you need it, decide. Watch results live on screen, analyse the recorded data after the test, or let the system make pass/fail decisions automatically. We choose the hardware and software that fit the job: off-the-shelf or custom, Windows or Linux, Excel through Python and C++.
Automatic test and monitoring
Most of our systems serve automatic test and long-term monitoring. Automatic test is not always about inputs and outputs: many customers simply need advanced measurement, calculation and recording, so an operator can judge pass or fail on screen and engineers can analyse the recorded data after the test.
Measure and record
Every channel scaled to engineering units, displayed live and written to file for post-test analysis.
Calculate and process
From simple scaling of a raw reading to real-time calculations, filtering and integrated DSP.
Decide automatically
Limits, pass/fail results, alarms and outputs – built into the processing, or added later.
What we measure
- Voltage-output sensors and signal conditioners – pressure, level, flow, temperature
- Current-output (4-20 mA) transmitters – pressure, level, flow, temperature
- Resistance sensors – NTC thermistors, PT1000 RTDs, potentiometers for position and level
- Switches and digital signals
- Accelerometers, including 2-axis vibration on rotating machinery
- 3-phase voltage and current
- Custom sensors, such as magnetic sensors built for the application
Need just one sensor on a PLC? See our 4-20 mA transmitters or the products and selection guide.
One sensor to hundreds
A system can start with a single channel and grow. We combine off-the-shelf and custom-built devices as a standard approach, so the system is sized to the job rather than to a catalog.
Talk to an engineer →Hardware: off-the-shelf or custom
We pick the acquisition hardware for accuracy, speed, cost and how the data has to travel – and build our own when nothing off the shelf fits.
| Approach | When it fits |
|---|---|
| Off-the-shelf USB data acquisition | Standard signals on a PC; fastest route to a working test bench |
| Custom ADC-to-USB devices | Special ranges, resolution or sensor excitation that COTS devices don’t offer |
| Microprocessor with UART + UART-to-USB | Custom sensors, local processing, or a simple, robust link to the PC |
| Embedded processors and low-cost mini PCs | Stand-alone or remote systems; expandable with I/O, running our own code |
| ROI-RFX-CPU wireless RS-485 converter | Serial, interface or protocol conversion – or all three – with multiport edge processing |
Capabilities we build in: distributed processing, remote status dashboards, PC-to-PC links over wireless, Ethernet or serial, integrated DSP, and custom protocols developed in-house. Related: serial conversion · interface conversion · protocol conversion.
Software: Windows or Linux, Excel to Python and C++
Software is chosen by what the job needs. On most projects the engineering time costs far more than any software license, so we use the tool that gets you a reliable result fastest – and move up only when the job demands it.
- Excel – readings straight into a spreadsheet for scaling, charts and reports. The simplest start, often with a USB converter and our DDE apps.
- Graphical tools such as DASYLab or LabVIEW – when you need unique displays or advanced real-time processing that Excel can’t easily do. Already using one? We build on your existing worksheets and code.
- Python or C++ – when the graphics, processing or system complexity go beyond DASYLab and LabVIEW, or the system runs embedded or on Linux, in the systems we build.
Windows or Linux – whichever suits the hardware, the environment and how long the system must run unattended.
Inherited a DASYLab or LabVIEW system?
The original developer is gone, nobody documented the code, or it stopped working after a PC or hardware change. We take over existing systems and get them running again – then make sure they never depend on one person again.
What we do
- Review and repair the existing worksheet or code
- Document it so your team can maintain it
- Add channels, sensors and hardware
- Add alarms, pass/fail limits and reports
- Supply any upgrade or license needed, as part of the job
Example systems
Rotating machinery over a slow network
Slice capture for fast remote transfer over slow networks, combined with conditioning for 3-phase voltage and current and 2-axis accelerometers.
Private radio network
Radio modem pairs form a private network for remote monitoring where no traditional network exists.
Event-triggered high-speed logger
A custom data logger that records on an event, straight to removable USB media.
Recording and display software
Custom software that records to file and displays results, with the GUI in LabVIEW, Python, DASYLab or Excel.
Typical configurations
- Independent units on a private network
- Multiple monitoring units polled from one operator screen
- Remote control outputs triggered by an operator
See also thermal energy and flow measurement (edge calculations for PLCs) and multi-channel distributed temperature measurement.
Common questions
What is a custom data acquisition system?
A measurement system built for one application: the sensors, signal conditioning, acquisition hardware and software chosen and configured together, so it measures, calculates and records exactly what the test or process needs.
Can the system decide pass or fail automatically?
Yes. Limits and pass/fail logic can be part of the processing from the start or added later; operators can still watch live results and the data is recorded for post-test analysis.
When do you use Python or C++ instead of DASYLab or LabVIEW?
When the graphics, real-time processing or overall complexity go beyond what DASYLab or LabVIEW handle well, or when the system runs embedded or on Linux.
Can you take over an existing DASYLab or LabVIEW system?
Yes. We review and repair inherited worksheets and code, document them, and extend them with new channels, alarms and reports – including systems whose original developer is no longer available.
Windows or Linux?
Either. We choose by the hardware, where the system runs and how long it must run unattended.
Can it start small?
Yes – from one sensor on a PC to hundreds of channels, using off-the-shelf and custom devices together.
Have a measurement or test problem?
Tell us what you need to measure, what has to be calculated or decided, and where the data has to go. Years of experience connecting sensors and software – signal conditioning, data acquisition and complete monitoring systems.
Questions? Contact us – we look forward to answering them.