USB Temperature Data Acquisition

You should consider USB-TEMP for USB Temperature Data Acquisition modules. Because they let you use read temperature sensors with a PC USB port.

USB Temperature Data Acquisition

The USB-TEMP Series provides improved cost/performance compared to similarly priced 24-bit DAQ devices. Each device provides seven isolated differential thermocouple analog inputs.

USB Analog Inputs

D8300 Series devices provide seven 24-bit Isolated temperature sensor USB analog inputs. The analog input ranges support 4 sensor types including thermocouple, RTD, thermistor, & semiconductor.

The USB-TEMP is compatible with a number of software options.

USB-TEMP series USB temperature sensor modules allow the simple measurement of industry standard temperature sensor signals. So, you can easily connect your existing temperature sensors to a modern sensor monitoring system. Furthermore, they are useful in HVAC systems, refrigeration systems, chillers, environmental monitoring, computer room monitoring, dryer, and a variety of other applications.

Simple to use USB temperature measurement

When you need simple to use temperature measurement, use the USB-TEMP series. In other words, USB-TEMP series isolated temperature sensor input modules are a simple way to add temperature sensor measurement to an environmental monitoring system.

Useful because it provides simple screw clamp wired inputs. It is easily used for sensor monitoring using industry standard sensor signals. Firstly, the USB-TEMP has simple to use Windows compatible software available. Secondly it uses industry standard temperature sensor signals. Therefore, temperature sensor measurement or temperature sensor profile recording is simple, data can be updated real time directly into Excel, on custom screens, recorded to file, and more! Total number of channels can be extended with additional units, as well as allowing an increased number of sensors.

So, you can, monitor 8 sensors per unit. Also, multiple units per system, expandable as needed.


• User-selectable temperature sensor input range per channel.
• USB communications interface.
• 500V analog input isolation.
• 24-bit analog input measurement resolution.
• PC powered.
• USB cable included.

J: –210 °C to 1200 °C
K: –270 °C to 1372 °C
R: –50 °C to 1768 °C
S: –50 °C to 1768 °C
T: –570 °C to 400 °C
N: –570 °C to 1300 °C
E: –570 °C to 1000 °C
B: 0 °C to 1820 °C
100 Ω PT (DIN 43760: 0.00385 ohms/ohm/°C)
100 Ω PT (SAMA: 0.003911 ohms/ohm/°C)
100 Ω PT (ITS-90/IEC751:0.0038505 ohms/ohm/°C)
Thermistor: Standard 2,252 Ω through 30,000 Ω
Semiconductor/IC: LM35, TMP35 or equivalent

[PC and Software, are not included]

Works with LabVIEW, Python, DASYLab, and more! Ask us about software assistance!

USB-TEMP Temperature measurement device with 8 channels (supports 4 sensor types including; thermocouple, RTD, thermistor, semiconductor
USB-TEMP Temperature measurement device with 8 channels (supports 4 sensor types including thermocouple, RTD, thermistor, semiconductor), 24-bit resolution, 2 S/s/ch sample rate, and 8 digital I/O
Scroll to Top