Simple sensor monitoring is possible with the DASYLab iNet-600 Bundle.
DASYLab Basic Data Acquisition
DASYLab Sensor Recording Software
Record and monitor real time a serial port connected sensor.
You can create applications quickly and easily by graphical programming.
Real-time data acquisition and display functions.
Standard real-time displays such as charts, meters, & graphs.
Simple creation of reusable code blocks.
Supported Operating Systems: Windows® 10 and Windows® 11.
Supports unlimited worksheet wires.
Supports up to 256 analog inputs and one layout window.
Includes PID, Statistics, Formula, FFT, Filter and other analysis features.
Includes control functions, Two-point Control, Switch, Slider, Coded Switch, as well as flexible triggers and comparison modules.
iNet-600 USB sensor measurement system
Connect to sensors to a Windows computer via a USB port.
The iNet-600 is an 8-channel direct-to-sensor data acquisition system, with an extremely accurate 24-bit A/D Converter, and voltage input ranges of: ±20mV, ±40mV, ±80mV, ±150mV, ±300mV, ±600mV, ±1.2V, ±2.5V, ±5V, ±10V. Connect Directly to a variety of sensors: voltage, thermocouple, thermistor, RTD, load cells, strain gages, potentiometer, current, & resistance sensors.
iNet-600 USB sensor measurement system is a stand-alone USB data acquisition system. No additional components, such as external power supply, are required. Included in the box: the iNet-600 USB Sensor Input Device, a USB Cable, Software on a CD, & a Mating Hd44 Female Connector + Hd44 Cover (requires soldering). Digitize at a maximum sample rate of 160K sample/sec for 1 channel, 12Ks/sec/channel for 2 channels, 6Ks/sec/channel for 4 channels, and 3Ks/sec/channel for 8 channels. Excitation power (+3.3V ±0.2V, <80mA, 28mA per sensor max) is provided for sensors.
iNet-512 Sensor Wiring Box
Wiring of the iNet-600 is made simpler with the iNet-512.
It provides the following features:
- Screw Terminals to which one can attach external signals.
- Enclosure box for protecting installed wires and shunt resistors.
INET-R-10K PRECISION 10K Ohm RESISTORS
Use the PRECISION 10K Ohm RESISTORS, PACK OF 8 (0.05%, 5PPM/C), to read thermistor temperature.
INET-R-10K, thermistor connection accessory for the iNet-600
ROI-N10K-CP-5 NTC 10K Probe Thermistor sensors (5 pack)
Use the 10K Ohm NTC Thermistor probes, PACK OF 5, to read temperature.
To read accurate temperate with your PC, connect 10K ohm NTC thermistors to the iNet-600. Thermistor termination resistors are needed, to read temperature. Wire your resistors to the iNet-512 sensor box using a screwdriver. Plug your iNet-512 into the iNet-600. Connect the iNet-600 to the PCUSB port. Open your software. Start reading temperature.
The DASYLab iNet-600 bundle is a USB sensor measurement system that creates a simple to use powerful sensor measurement & recording data acquisition solution.
