5K Potentiometer 4-20mA Transmitter

5K POTENTIOMETER 4-20mA TRANSMITTER

Read potentiometers with your PLC and the 5K potentiometer 4-20mA transmitter

5K OHM POTENTIOMETER 4-20mA TRANSMITTER

 

ROI-25XMA05KP

5K ohm potentiometer 4-20mA transmitter

The ROI-XMA series is a versatile family of loop powered 4-20mA potentiometer transmitters. Versions can be provided for potentiometers with resistances (max), between 1K ohm and 10K ohm impedance. Signal range can be custom scaled to alternate spans within sensor range. Transmitter supply voltage may be from 7.5 to 36Vdc. Output circuit is reverse connection protected and filtered.

  • PLUGGABLE EURO ELECTRICAL CONNECTORS

  • SNAP ON MOUNTING BASE FOR DIN RAIL OR SURFACE MOUNTING

  • WIDE 4-20mA LOOP SUPPLY RANGE FROM 7.5-36V

  • USED IN REMOTE MONITORING

  • MEASURE 1K OHM TO 10KOHM INDUSTRY STANDARD POTENTIOMETERS

  • READ TRANSMITTER WITH PLC, RTU, PC A-D SYSTEMS

  • USE WITH 20mA, 5V, 10V MEASUREMENT SYSTEMS *

Specifications:

MOUNTING: 35mm DIN rail or surface mountable snap on base

SUPPLY RANGE: 7.5 TO 36Vdc

SIGNAL OUTPUT: 4-20mA ( LOOP POWERED )**

CONNECTIONS: 30-12awg wire

INPUT RESISTANCE RANGE: 5K ohm

INPUT TYPE: Potentiometer

RESPONSE: 10ms

DIMENSIONS: 4.510 X 1.258 X 3.948 (height above rail) LWH***

* Loop termination resistor required when used with voltage ADC

** 4-20mA signal uses a 2 wire connection. Resistance transmitter output is connected in series, with supply and measurement device.

*** Mated connector adds additional 3/8” to height.

String pots, linear and rotary potentiometer position sensor measurement; the industry standard potentiometer is a very simple way to add a position sensor measurement to a PLC.

Use spare PLC 4-20mA inputs for position sensor measurement, with ROI-XMA potentiometer transmitters. ROI-XMA potentiometer transmitters allow the simple measurement of industry standard potentiometers. Existing potentiometers can be connected to modern control systems. String pots, linear and rotary potentiometer, and other position sensors; the potentiometer is a simple way to add position sensor measurement to a PLC.

ROI-25XMA05KP

5K ohm potentiometer 4-20mA transmitter

Scroll to Top