PT1000 RTD 4-20mA transmitter
READ RTDs WITH YOUR PLC with a PT1000 RTD 4-20mA transmitter
The ROI-XMA series is a versatile family of loop powered 4-20mA temperature transmitters. Versions can be provided for Platinum RTD resistances, of 100 ohm or 1000 ohm impedance. Signal range can be custom scaled to alternate RTD temperature spans within sensor range. 4-20mA transmitter supply voltage may be from 7.5 to 36Vdc. Output circuit is reverse connection protected and filtered.
PLUGGABLE EURO ELECTRICAL CONNECTORS
SNAP ON MOUNTING BASE FOR DIN RAIL OR SURFACE MOUNTING
WIDE 4-20mA LOOP SUPPLY RANGE FROM 7.5-36V
USED IN REMOTE MONITORING
MEASURE 100 OHM AND 1KOHM INDUSTRY STANDARD RTDs
READ TRANSMITTER WITH PLC, RTU, PC A-D SYSTEMS
USE WITH 20mA, 5V, 10V MEASUREMENT SYSTEMS *
MOUNTING: 35mm DIN rail or surface mountable snap on base
SUPPLY RANGE: 7.5 TO 36Vdc
SIGNAL OUTPUT: 4-20mA ( LOOP POWERED )**
CONNECTIONS: 30-12awg wire
INPUT RANGE: -200 to 500 Deg C
INPUT TYPE: PT1000 2 WIRE RTD
DIMENSIONS: 4.510 X 1.258 X 3.948 (height above rail) LWH***
* Loop termination resistor required when used with voltage ADC
** 4-20mA signal uses a 2 wire connection. Resistance transmitter output is connected in series, with supply and measurement device.
*** Mated connector adds additional 3/8” to height.
Existing PT1000 RTDs can be connected to modern control systems. Use spare PLC 4-20mA inputs for RTD temperature sensor measurement, with ROI-XMA RTD transmitters. ROI-XMA RTD transmitters allow the simple measurement of industry standard RTDs. Existing RTDs can be connected to modern control systems. The RTD is a simple way to add temperature sensor measurement to a PLC. RTDs are ideally suited for moderate temperature ranges can be used to achieve high precision.
1000 Ohm -200 to 500 C PT1000 RTD 4-20mA transmitter