The ROI-XMA series is a versatile family of loop powered 4-20mA potentiometer transmitters. Versions can be provided for Base Resistance, between 1K and 10Kohm impedance. Signal range can be custom scaled to alternate resistance spans within sensor range. Transmitter supply voltage may be from 7.5 to 36Vdc. Output circuit is reverse connection protected and filtered.
PLUGGABLE EURO ELECTRICAL CONNECTORS
SNAP ON MOUNTING BASE FOR DIN RAIL OR SURFACE MOUNTING
WIDE 4-20mA LOOP SUPPLY RANGE FROM 7.5-36V
USED IN REMOTE MONITORING
MEASURE 10K OHM INDUSTRY STANDARD POTENTIOMETER POSITION SENSORS
READ TRANSMITTER WITH PLC, RTU, PC A-D SYSTEMS
USE WITH 20mA, 5V, 10V MEASUREMENT SYSTEMS *
MOUNTING: 35mm DIN rail or surface mountable snap on base
SUPPLY RANGE: 7.5 TO 36Vdc
SIGNAL OUTPUT: 4-20mA ( LOOP POWERED )**
CONNECTIONS: 30-12awg wire
INPUT RANGE: 0-10K ohm
INPUT TYPE: POTENTIOMETER
DIMENSIONS: 4.510 X 1.258 X 3.948 (height above rail) LWH***
* Loop termination resistor required when used with voltage ADC
** 4-20mA signal uses a 2 wire connection. Resistance transmitter output is connected in series, with supply and measurement device.
*** Mated connector adds additional 3/8” to height.
Use spare PLC 4-20mA inputs for position sensor measurement, with the ROI-XMA potentiometer transmitter. ROI-XMA potentiometer transmitters allow the simple measurement of industry standard potentiometers. Existing 10K ohm NTC thermistors can be connected to modern control systems. The thermistor is a simple way to add temperature sensor measurement to a PLC. The potentiometer is ideally suited for position measurement more simply than other position sensors. Useful in HVAC systems, refrigeration systems, chillers, environmental monitoring, computer room monitoring, dryer, and other monitoring range applications.