10Vdc 50KHz isolation amplifier signal isolator
The ROI-ISOV10 is a simple to use isolated signal conditioner. Input and output sections powered by separate supplies, galvanic isolation accomplished via capacitive barrier.
-
PLUGGABLE EURO ELECTRICAL CONNECTORS
-
SNAP ON MOUNTING BASE FOR DIN RAIL OR SURFACE MOUNTING
-
USED IN LOOP ISOLATION
-
GROUND LOOP ELIMINATION
-
SIGNAL ISOLATION
Specifications:
- Isolation level: 1.5Kv
- method: 500KHz modulation passed over a dual (differential) 1pF barrier
- Input range: +/-10V
- Input Resistance: 200K ohm
- Output range: +/-10V
- ripple: 20mVp-p 500KHz
- Gain: 1
- error: +/- 0.05%FSR typical, +/-0.5%max
- nonlinearity: +/-0.005%FSR typical. +/-0.01%max
- Frequency response: DC to 50KHz
- Supplies: Dual +/-4.5 to 18Vdc 5mA typ. 7mA max for input side 5.5mA typ. 7mA max for output side
- Connections: 2, input & output negative-power/ground/signal/positive-power, plug in top entry connectors, screw clamp stripped wire connection 30-12awg wire
- Mounting: 35mm DIN Rail or Surface mountable snap on base, allows side by side install of multiple units
- Dimensions: 4.510 X 1.258 X 3.948” (height above rail) lwh*
*Mated connector adds additional 3/8” to height
The ROI-ISOV10 is a general purpose 10V bipolar +/-15V powered 2 way isolation amplifier. It allows simple isolation to be added to a measurement, for ground loop elimination or voltage separation.
10Vdc 50KHz isolation amplifier signal isolator
To learn more Contact Us we look forward to answering your questions.